Florin-Gro Brightwell

در حال آماده سازی
Florin-Gro

General Information:

- Concentrated source of nitrogen, one of the most important plant nutrients, required for growth and long-term health, and utilized primarily in the production of nucleic acids andproteins, accounting for up to 2% of plant tissue dry weight.
- Nitrogen is present as nitrate, a form appropriate for use in aquaria (ammonium can revert to toxic ammonia in aquaria with pH over 7.0; urea is a source of ammonia).
- Contains Kelp extract, which provides natural phytohormones found to encourage growth and flowering.
- Formulated utilizing extensive research on aquatic plant nutrient requirements.

Guaranteed analysis:

Total Nitrogen (N) as Nitrate (min) 1.50% (444 mg/oz.; 15,000 ppm)

Instructions:

Shake product well before using. The most effective method of using any ion-specific supplement is to determine the ionic concentration in the aquarium prior to supplementing. Maintain the nitrate concentration within a range of 10 - 20 ppm; it is not recommended to exceed 25 ppm nitrate in planted aquaria housing fishes and invertebrates.

Basic: Add 5 ml (1 capful) of product per 50 US-gallons (189.3 L) of aquarium water every other day or as required; this corresponds to 1 ml (~8 drops) per 10 US-gallons (37.9 L). When used in this fashion, 250 ml treats up to 2,500 US-gallons (9,464 L).

Advanced: Determine the nitrate concentration (“[NO3-]”) in the aquarium using an accurate test kit before supplementing. Each ml of FlorinGro will increase the [NO3-] in 1 US-gallon (3.785 L) of water by 17.5 ppm. Each drop (250- and 500-ml cap) will increase the [NO3-] in 1 US-gallon (3.785 L) of water by 2.2 ppm, and the [NO3-] in 20 US-gallons (75.7 L) by 0.11 ppm. If the initial [NO3-] in the aquarium is below 20 ppm, add this product at the maximum rate of 1 ml per 5 US-gallons daily until the desired concentration is attained, then dose daily or weekly as needed (see below). Always attempt to maintain the [NO3-] within a range of +/-2 ppm. To determine the dosing rate of this product once the desired [NO3-] has been acquired, measure the daily rate of nitrate uptake (i.e. the decrease in nitrate) in your aquarium by measuring the aquarium's [NO3-] at the same time each day over a one- to two-week period. To determine the daily dosing rate (preferable to weekly dosing) for nitrate maintenance: estimate the volume of water in the entire aquarium system; divide the daily decrease in [NO3-] by 17.5; multiply this number by the volume of water in the system to get the daily dosage required (ml) to maintain a stable [NO3-]. Daily dosing maintains a more stable [NO3-] (and more natural environment) than dosing weekly, in which the [NO3-] spikes just after dosing and then gradually decreases throughout the course of the week. Heavily-planted aquaria with intense lighting, CO2 supplementation, and low- to moderate-stocking density of fishes are likely to see the most dramatic results from nitrogen supplementation. Start at a low dosage and increase it as required, but do not overdose regardless of the temptation to do so.

Comment